What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 00:49

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, what happens?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–10[John johnson John Johnson ]
A circuit breaker is similar, but is resettable.
Because the load is inductive, the current lags the voltage.(by a bit).
Every big announcement from Xbox Games Showcase 2025 - Polygon
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
One
[image of Common-mode choke]
Cum at omnis doloremque totam.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
nine
There are two important concepts here.
How was your JEE Mains 2024 April attempt?
Here is a simplified AC power diagram.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What is lightning?
Baby Talk Enhances Infant Speech Learning - Neuroscience News
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Astros Place Jacob Melton On 10-Day Injured List - MLB Trade Rumors
First Sentence:
2024–10–16 [ OO OLAOYE OYEBODE ]
This one hit behind the barn.
What are the upcoming trends in artificial intelligence and machine learning?
He then describes the function of a fuse.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
Apple’s Spin on the Personalized Siri Apple Intelligence Reset - Daring Fireball
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The other is “what does a “fuse” do?”
This device then solves the entire problem.
This is 'the assistant's answer'
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
A fuse is a non-resetable over current circuit protector.
Could supermassive black holes anchor the tiniest galaxies? - Big Think
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Sam Rockwell had his head shaved by strippers before quitting 'G.I. Jane' - Entertainment Weekly
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
For this case there are devices called Metal oxide varistors (MOV).
In schematic diagrams this is the symbol for a fuse:
What are the signs of legitimate BPO project opportunities versus scams?
the problem then depends on "how fast does the fuse operate?".
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
It also is a device that limits the change in current flow.
2024–10–14 [Omar Gharbi Omar Gharbi ]
But… the neutral is now “floating” because of the 1 ohm resistance.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Barnstars:
It seems Mohan does not understand the difference between a comment and an Answer.
These are simplified answers to the original question, and does not change anything I wrote above.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But it can get overloaded, and no longer works.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So, the voltage could go up to 500 volts, and the fuse will not open up.
What does a fuse do?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
eight
what exactly is a ‘surge’ protector?
One is “what exactly is in a ‘surge protector’ ? ”
The MOV will conduct when the voltage exceeds 50% of line voltage.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
(Dc diagram shown, AC is similar).
[old diagram got deleted by accident]
This is where this question deviates from being a 'generic' question, and becomes more specific.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes Rainy Season and Lightning.
but this device (an Inductor) … impedes the rapid changes in the current.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Now when you have a certain ac resistance, then a current flows in a loop.
These devices are installed between the “hot” and “neutral” and protective ground.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There are three different concepts here that are getting confused.
but I think this circuit , shows a few more pieces.
He then asserts :
The third is lightning and “how it gets conducted into a home.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The bolt then partially travels down the line to your home.
Edit 2024–10.
An AC voltage/ current source, and an ac inductive load.
At least they know the answer if they wanted it.
At one ohm, the resistor has a maximum of 1 watt power.
Upvotes:
This is where the MOV conducts again, and dissipated the energy.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”